Savin 2513f Instructions d'exploitation télécharger pdf (Page 89)

Remote Maintenance by telnet

System log information

Use the syslog command to display information stored in the machine's system

log.

msh> syslog

Reference

For more information about the displayed information, see P.84 “System Log

Information”.

SNMP

Use the snmp command to display and edit SNMP configuration settings such

as the community name.

Note

❒ You can configure from ten SNMP access settings numbered 1–10.

❒ Default access settings 1 and 2 are as follows.

❖

❖❖

❖ Display

Shows the SNMP information and available protocols.

msh> snmp ?

msh> snmp [-p] [registered_number]

Note

❒ If the -p option is added, you can view the settings one by one.

❒ Omitting the number displays all access settings.

❖

❖❖

❖ Community name configuration

You can set the community name of the registered number.

msh> snmp number name community_name

Note

❒ The community name must consist of 15 characters or less.

Number 1 2

Community name public admin

IP address 0.0.0.0 0.0.0.0

Access type read-only

trap off

read-write

trap off

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 111 112

Pas de commentaire

Savin 2513f Instructions d'exploitation Page 89