Savin 2513f Instructions d'exploitation télécharger pdf (Page 87)

Remote Maintenance by telnet

❒ For example, if you assign 192.168.15.16 as the Access Control Address of the

Network Interface Board, the IP addresses that can print are as follows: XXX

means any number from 1 to 254 is acceptable.

Network Boot

Use the set command to configure the boot method.

msh> set parameter {on | off}

“on” means active and “off” means inactive.

Note

❒ When you use DHCP, the server also needs to be configured.

❒ DHCP takes precedence over all other settings.

Protocol

Use the set command to allow/prevent remote access for each protocol.

msh> set protocol {up | down}

Access Control Mask IP addresses that can access the

printer

0. 0. 0. 0 XXX.XXX.XXX.XXX

255. 0. 0. 0 192.XXX.XXX.XXX

255.255. 0. 0 192.168.XXX.XXX

255.255.255. 0 192.168. 15.XXX

255.255.255.255 192.168. 15. 16

Parameter Meaning

dhcp DHCP (Dynamic Host Configuration

Protocol)

Protocol

appletalk

tcpip

netware

netbeui

lpr

ftp

rsh

diprint

web

snmp

ipp

“up” means active and “down” means

inactive.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 111 112

Pas de commentaire

Savin 2513f Instructions d'exploitation Page 87