Savin Aficio SP3300DN Manuel de service télécharger pdf (Page 91)

Software (Errors, Symptoms, Causes and Solutions)

SM 4-33 M000/M009

Trouble-

shooting

4.5.3 ABNORMAL PRINTING

Description:

The printer is not working properly even when the cable has been verified to be good

(after replacing the cable, etc.).

If the printer won't work at all or the strange fonts are repeated, the printer driver may be

defective or wrongly set up in the CMOS Setup.

Symptom and Cause Solution

1. Set up the parallel port in the CMOS

SETUP.

2. Printer Driver Error.

3. Error message from insufficient

memory.

4. (The printing job sometimes stops due

to insufficient virtual memory, but it

actually comes from insufficient space

on the hard disk.)

1. Select SPP (Normal) or ECP LPT Port

(among ECP, EPP or SPP) in the

CMOS Setup.

2. Check the printer in My Computer. (To

see if the printer driver is compatible

with the present driver. Delete old

driver, if defective, and reinstall new

one.)

3. Delete unnecessary files to open up

enough space of the hard disk and

start printing job again.

CÓPIA NÃO CONTROLADA

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 137 138

Pas de commentaire

Savin Aficio SP3300DN Manuel de service Page 91