Savin SDC103A Manuel de service télécharger pdf (Page 242)

100

101

58. Remove the chain hook [A] from the magnet catch [B], and hook it on

the frame [C] as shown.

59. Slowly insert the development unit completely into the copier while

making sure that the chain is not caught by the development unit. Then

secure the development unit to the copier front frame (1 connector, 1

harness clamp, 1 short screw, and 1 long screw).

NOTE: When inserting the development unit into the copier, be sure to

check that the toner supply motor pin [D] is aligned with the

opening [E] in the toner supply solenoid plunger mechanism.

Also ensure the shield glass plate [F] is inserted completely.

60. Remove the development unit handle from the development unit and

replace it in the inner cover.

61. Rotate the revolver counterclockwise while keeping the toner supply

motor unit [G] away from the revolver [H]. The revolver stopper should

stop the revolver with a click at each development position. If not, the

development roller drive gear and the development roller gear did not

mesh properly. Reinsert the development unit.

[A]

[C]

[B]

[E]

[D]

[F]

[G]

[H]

Installation

Procedure

COPIER INSTALLATION

SM 3-27 A166/A187/A189

CÓPIA NÃO CONTROLADA

1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 622 623

Commentaires sur ces manuels

Pas de commentaire

Savin SDC103A Manuel de service Page 242

Commentaires sur ces manuels

Produits connexes et manuels pour Multifonctionnels Savin SDC103A