Savin 3360DNP Instructions d'exploitation télécharger pdf (Page 108)

Operation

• There is no limit to the number of areas you can designate on a single com-

mand sheet.

• If designated areas on two or more command sheets overlap, the last com-

mand sheet will apply to the overlapping portion.

• If you use Outline mode for letter images with a thickness of less than 3mm,

0.12", the print image might come out as expected.

-Notes

The image might differ depending on how the designated area is drawn, so re-

member the following when making the command sheet.

Designated area Area recognized Preferred designated area

Part of the designated area is

surrounded by 3 sides of the en-

tire area.

Make a space of at least 2mm,

0.08", in front of the area surround-

ed by 3 sides (relative to the feed

direction).

1, 2 = 2mm, 0.08"

Double line pattern. Only the outer line is

recognized.

Make a gap of at least 2mm, 0.08"

in width.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 232 233

Pas de commentaire

Savin 3360DNP Instructions d'exploitation Page 108