Savin P7026 Manuel d'instructions

WS-7026U Wireless 433 MHz Radio-Controlled Weather Station Instruction Manual 

10VII. SELECTING °F OR °C 1. Press and hold the SET button for 3 seconds or until “12h” or “24h” flashes in the DATE LCD. 2. Press the SET button

11FEATURES OF THE WS-7026U I. BACKLIGHT The WS-7026U has a backlight that can be activated by pressing any of the eight function buttons. Afte

12A. WEATHER ICONS There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny—indicates that the weather is expected t

13 The current Indoor Temperature (viewed on the left) and Relative Humidity (viewed on the right) are displayed in the INDOOR LCD. The Comfort Leve

14seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings. B. VIEWING THE OUTDO

152. Press the IN button to set the alarm hours and the OUT button to set the alarm minutes. 3. Press the AL1 button or wait 15 seconds for the uni

16contacting La Crosse Technology directly. A TX4U will monitor temperature and humidity, a TX3U will monitor temperature only and the TX3UP will mo

17and hold the OUT button for 5 seconds, the records for the selected Thermo Hygro Sensor unit will be reset. MOUNTING Note: Before permanently

185. Screw mounting bracket onto the mounting surface. The screws should be flush with the bracket. 6. Fit the mounting post (on the back of the se

193) Place the Indoor Temperature Station onto the screw using the hanging hole on the backside. Gently pull the Station down to lock the screw i

2 Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 4-5 Quick Set-Up Guide 5 Detailed Set-Up Guide Battery Installation 5-6 Pro

20TROUBLESHOOTING Problem: No reception of WWVB time signal. Solution: 1) Wait overnight for signal. 2) Be sure weather station is at least 6 feet f

21MAINTENANCE AND CARE INSTRUCTIONS • Extreme temperatures, vibration and shock should be avoided to prevent damage to the units. • Clean displays

22SPECIFICATIONS Temperature measuring range: Indoor: 32°F to 139.8°F with 0.2°F resolution. (0°C to 59.9°C with 0.1°C resolution). “OFL” displaye

23 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and w

24ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS

3INVENTORY OF CONTENTS 1. The Weather Station (Figure 1). 2. One TX4U Thermo Hygro Sensor with mounting bracket (Figure 2). 3. Three each ½” P

4a second per day. These physicists have created an international standard measuring a second as 9,192,631,770 vibrations of a Cesium-133 atom in a

5lower-central position of the battery cover, then push up and pull out on the battery cover. 2. Observe the correct polarity and install 2 AA batte

6PROGRAM MODE Programming Note: If 30 seconds is allowed to pass or either the IN or the OUT button is pressed during programming modes, the unit wi

7the TIME LCD. Observe the chart below showing the corresponding abbreviations, time zones and codes. TIME ZONES GMT 0 Atlantic -4 EST; Eastern -

8V. TIME There are two methods by which the time can be set: A) Automatically via WWVB reception or B) Manually A. WWVB (Remote Control Time)

9Note: In 12h mode, “PM” will appear to the left of the time during PM hours. If the time is not within the PM hours, nothing will be displayed. Be